TP-Link TD-W9960 TD-W9960EU V1 User Guide - Page 82
Advanced, System Tools, Administration, Remote, Management, Remote Management, via HTTPS
View all TP-Link TD-W9960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 14 Administrate Your Network Follow the steps below to allow remote devices to manage the modem router over HTTPS. 1. Visit http://tplinkmodem.net, and log in with the account you set for the router. 2. Go to Advanced > System Tools > Administration page. Locate the Remote Management section. 3. Tick the check box to enable Remote Management. Enable Remote Management via HTTPS to allow for HTTPS connection. Keep the Port as the default setting. 4. Set the client device allowed for remote management. Select All to allow all remote devices to manage the modem router. If you just want to allow a specific device to manage the modem router, select Only the Following IP/MAC Address and enter the IP/MAC address of the remote device. 5. Click Save. All devices or the specific device on the internet can log in to your router using the address displayed on the Manage This Router via the Address field to manage the modem router. Tips: 1. If you were warned about the certificate when visiting the web management page remotely, click Trust (or a similar option) to continue. To avoid this warning, you can download and install the certificate on the modem router's web management page at Advanced > System Tools > Administration. 2. The router's WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. 78