TP-Link TD-W9970B TD-W9970BEU V1 User Guide - Page 74
Guest Network, 4.9.1 Basic Settings
View all TP-Link TD-W9970B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
TD-W9970/TD-W9970B 300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide Se nt Packe ts: Packets sent by the station To update this page and to show the current connected wireless stations, click on the Refresh button. 4.9 Guest Network There are two submenus under the Guest Network menu: Basic Settings and Guest Network Status. Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below. 4.9.1 Basic Settings Choose menu "Guest Network""Basic Settings", and you will see the screen as shown in Figure 4-52. This feature allows you to create a separate network for your guests without allowing them to access your main network and the computers connected to it. Figure 4-52 Guest Network: You can choose your Guest Network. When you enable this function, you could set wireless parameters for Guest Network. SSID: The guest network name. When setting up a Guest network, it is strongly recommended to use a name that easily distinguishes it from your primary network. The default SSID is set to be TP-LINK_Guest. Security: The default value is disabled, but it's strongly recommended to enable WPA/WPA2-Personal. WPA/WPA2-Personal is the WPA/WPA2 authentication type based on pre-shared passphrase. Authentication Type: Select the Authentication Type from the drop-down list, the default method is Auto, and you can leave it as a default setting. Encryption: You can select either Auto, or TKIP or AES. 66