TP-Link TD-W9980 User Guide - Page 31
IPv6 DNS Server / Secondary IPv6 DNS Server - manual
View all TP-Link TD-W9980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TD-W9980 N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide Figure 4-5 WAN Service Setup: Enable IPv4:Check the box to enable IPv4. IP Address: Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask: Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. Default Gateway (Optional): Enter the gateway IP address in dotted-decimal notation provided by your ISP. DNS Server/ Secondary DNS Server: Here you can set DNS Server (at least one) manually. The Route will use this DNS Server for priority. Enable IPv6: Check the box to enable IPv6. IPv6 Address: Enter the IPv6 address provided by your ISP. Prefix Length: Enter the prefix length of the IPv6 address. The default value is 64. IPv6 Gateway: Enter the gateway IPv6 address provided by your ISP. IPv6 DNS Server / Secondary IPv6 DNS Server: Here you can set IPv6 DNS Server (at least one) manually. The Route will use this IPv6 DNS Server for priority. Default Gateway: Select a WAN Interface from the drop-down list as the IPv4 default gateway. 21