TP-Link TD-W9980 User Guide - Page 34
PPP Username/Password/Confirm Password, Service Name/Server Name
View all TP-Link TD-W9980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TD-W9980 N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide Figure 4-7 PPP Username/Password/Confirm Password: Enter the User Name, Password and Confirm Password provided by your ISP. These fields are case-sensitive. Connection Mode: For PPPoE connection, you can select Always on or Connect on demand or Connect manually. Connect on demand is dependent on the traffic. If there is no traffic (or Idle) for a pre-specified period of time, the connection will drop down automatically. And once there is traffic send or receive, the connection will be automatically on. Authentication Type: Select the Authentication Type from the drop-down list, the default method is AUTO_AUTH, and you can leave it as a default setting. Enable IPv4: Check this box to enable IPv4. Enable IPv6: Check this box to enable IPv6. Default Gateway: Select a WAN connection from the drop-down list as the IPv4 default gateway. IPv6 Default Gateway: Select a WAN connection from the drop-down list as the IPv6 default gateway. Click Advance, advanced selections for WAN Service Setup can be shown. Service Name/Server Name: Enter the Service Name and Server Name if it was provided by your ISP. You can leave them blank, if the ISP doesn't provide them. 24