TP-Link TD-W9980 User Guide - Page 63
WPA/WPA2 - Enterprise, Group Key Update Period
View all TP-Link TD-W9980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
TD-W9980 N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide There are three wireless security modes supported by the modem router: WPA/WPA2 - Personal, WPA/WPA2 - Enterprise, WEP (Wired Equivalent Privacy). Figure 4-41 Disable Wireless Security: If you do not want to use wireless security, check this radio button. But it's strongly recommended to choose one of the following modes to enable security. WPA/WPA2-Personal: It's the WPA/WPA2 authentication type based on pre-shared passphrase. The modem router is configured by this security type by default. Authentication Type: You can choose the type for the WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK authentication type automatically based on the wireless station's capability and request. Encryption: You can select Auto, TKIP or AES as Encryption. Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. The default password is the same with the default PIN code, which is labeled on the bottom of the Router or can be found in Figure 4-38. Group Key Update Period: Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. WPA/WPA2 - Enterprise: It's based on Radius Server. 53