TP-Link TL-SG3424 TL-SG3216 V1 CLI Reference Guide - Page 122
storm-control disable ul-rate, port rate-limit
View all TP-Link TL-SG3424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
TP-LINK(config)# interface ethernet 5 TP-LINK(config-if)# storm-control disable mc-rate storm-control disable ul-rate Description The storm-control disable ul-rate command is used to disable the UL-Frame control. Syntax storm-control disable ul-rate Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Disable the UL-Frame control for port5: TP-LINK(config)# interface ethernet 5 TP-LINK(config-if)# storm-control disable ul-rate port rate-limit Description The port rate-limit command is used to configure the Rate Limit for an Ethernet port. To disable the Rate Limit, please use no port rate-limit command. Syntax port rate-limit [ ingress ingress-rate ] [ egress egress-rate ] no port rate-limit Parameter ingress-rate -- Select the bandwidth for receiving packets. The value of it can be 100 | 200| 500kbps or 1 | 2 | 4 | 5 | 10 | 20 | 40 | 50mbps. egress-rate -- Select the bandwidth for sending packets. The value of it can be 100 | 200| 500kbps or 1 | 2 | 4 | 5 | 10 | 20 | 40 | 50mbps. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the ingress-rate as 10Mbps and egress-rate as 1Mbps for port5: 111