TP-Link TL-SG3424 TL-SG3216 V1 CLI Reference Guide - Page 68
dhcp-snooping decline, show binding-table - default ip
View all TP-Link TL-SG3424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
value --The value of Flow Control. The options are 0/5/10/15/20/25/30 (packet/second). The default value is 0, which stands for disable. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Set the Flow Control of port 2 as 20 pps: TP-LINK(config)# interface ethernet 2 TP-LINK(config-if)# dhcp-snooping rate-limit 20 dhcp-snooping decline Description The dhcp-snooping decline command is used to enable the Decline Protect feature. To disable the Decline Protect feature, please use no dhcp-snooping decline command. Syntax dhcp-snooping decline no dhcp-snooping decline Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable the Decline Protect feature of port 2: TP-LINK(config)# interface ethernet 2 TP-LINK(config-if)# dhcp-snooping decline show binding-table Description The show binding-table command is used to display the IP-MAC-VID-PORT binding table. Syntax show binding-table 57