TP-Link TL-SG3424 TL-SG3216 V1 CLI Reference Guide - Page 179
snmp-rmon alarm owner
View all TP-Link TL-SG3424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
f-hold -- The falling counter value that triggers the fall hold alarm, ranging from 1 to 65535. By default, it is 100. f-event -- Fall Event, which is the index of the corresponding event which will be triggered if the sampled value is lower than the Fall Hold. It ranges from 1 to 12. a-type -- Alarm Type, with rise, fall and all options. Rise indicates that the alarm event will be triggered when the sampled value exceeds the Rise Hold, fall indicates that the alarm event will be triggered when the sampled value is under the Fall Hold, and all indicates that the alarm event will be triggered either the sampled value exceeds the Rise Hold or is under the Fall Hold. By default, the Alarm Type is all. interval -- The alarm interval time, ranging from 10 to 3600 in seconds. By default, it is 1800. Command Mode Global Configuration Mode Example Configure the alarm interval time of the entries 1,2,3 and 6 as 1000 seconds: TP-LINK(config)# snmp-rmon alarm config 1-3,6 interval 1000 snmp-rmon alarm owner Description The snmp-rmon alarm owner command is used to configure the owner of the Alarm Management entry. To return to the default configuration, please use no snmp-rmon alarm owner command. Syntax snmp-rmon alarm owner {index} [owner] no snmp-rmon alarm owner {index} Parameter index -- The index number of the entry, ranging from 1 to 12. You can only select one entry for each command. owner -- The owner of the entry, ranging from 1 to 16 characters. By default, it is minitor. Command Mode Global Configuration Mode Example 168