TP-Link TL-SG3424 TL-SG3216 V1 CLI Reference Guide - Page 61
Binding Table Commands, binding-table user-bind
View all TP-Link TL-SG3424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 11 Binding Table Commands You can bind the IP address, MAC address, VLAN and the connected Port number of the Host together, which can be the condition for the ARP Inspection to filter the packets. binding-table user-bind Description The binding-table user-bind command is used to bind the IP address, MAC address, VLAN ID and the Port number together manually. You can manually bind the IP address, MAC address, VLAN ID and the Port number together in the condition that you have got the related information of the Hosts in the LAN. Syntax binding-table user-bind hostname ip-addr mac-addr vlan vid port port-num {none | arp-detection} Parameter hostname --The Host Name, which contains 20 characters at most. ip-addr -- The IP Address of the Host. mac-addr -- The MAC Address of the Host. vid --The VLAN ID neened to be bound, ranging from 1 to 4094. port-num -- The number of port connected to the Host. {none | arp-detection}--Disable or Enable ARP detection for the entry. Command Mode Global Configuration Mode Example Bind an ACL entry with the IP is 192.168.0.1, MAC is 00:00:00:00:00:01, VLAN ID is 2 and the Port number is 5 manually. Andthen enable the entry for the ARP detection.: TP-LINK(config)# binding-table user-bind host1 192.168.0.1 00:00:00:00:00:01 vlan 2 port 5 arp-detection 50