TP-Link TL-SG5428 TL-SG5428 V1 CLI Reference Guide - Page 109
SSL Commands, ssl enable, ssl download certificate
View all TP-Link TL-SG5428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 19 SSL Commands SSL(Secure Sockets Layer), a security protocol, is to provide a secure connection for the application layer protocol(e.g. HTTP) based on TCP. Adopting asymmetrical encryption technology, SSL uses key pair to encrypt/decrypt information. A key pair refers to a public key (contained in the certificate) and its corresponding private key. By default the switch has a certificate (self-signed certificate) and a corresponding private key. The Certificate/Key Download function enables the user to replace the default key pair. ssl enable Description The ssl enable command is used to enable the SSL function on the switch. To disable the SSL function, please use no ssl enable command. Only the SSL function is enabled, a secure HTTPS connection can be established. Syntax ssl enable no ssl enable Command Mode Global Configuration Mode Example Enable the SSL function: TP-LINK(config)# ssl enable ssl download certificate Description The ssl download certificate command is used to download a certificate to the switch from TFTP server. Syntax ssl download certificate ssl-cert ip-address ip-addr Parameter ssl-cert -- The name of the SSL certificate which is selected to download to the switch . The length of the name ranges from 1 to 25 characters. The Certificate must be BASE64 encoded. 97