TP-Link TL-SG5428 TL-SG5428 V1 CLI Reference Guide - Page 130
flow-control, negotiation, Disable Ethernet port3
View all TP-Link TL-SG5428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Disable Ethernet port3: TP-LINK(config)# interface ethernet 3 TP-LINK(config-if)# shutdown flow-control Description The flow-control command is used to enable the flow-control function for a port. To disable the flow-control function for this corresponding port, please use no flow-control command. With the flow-control function enabled, the Ingress Rate and Egress Rate can be synchronized to avoid packets drop in the network. Syntax flow-control no flow-control Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable the flow-control function for Ethernet port 5: TP-LINK(config)# interface ethernet 5 TP-LINK(config-if)# flow-control negotiation Description The negotiation command is used to configure the Negotiation Mode for an Ethernet port. To return to the default configuration, please use no negotiation command. Syntax negotiation {auto | 10h |10f |100h |100f |1000f} no negotiation 118