TP-Link TL-SG5428 TL-SG5428 V1 CLI Reference Guide - Page 119
ip address
View all TP-Link TL-SG5428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Parameter start-date -- The start date of DST you set. start-time -- The start time of DST you set. end-date -- The end date of DST you set. end-time -- The end time of DST you set. Command Mode Global Configuration Mode Example Configure the dst, dst is from April 1 00:00 to November 1 23:00. TP-LINK(config)# system-time dst 04/01 00:00 11/01 23:00 ip address Description The ip address command is used to configure the IP Address, Subnet Mask and Default Gateway. To restore to the factory defaults, please use no ip address command. Syntax ip address {ip-addr} {ip-mask} [gateway] no ip address Parameter ip-addr -- The system IP of the Switch. The default system IP is 192.168.0.1. ip-mask -- The Subnet Mask of the Switch. The default Subnet Mask is 255.255.255.0. gateway -- The Default Gateway of the Switch. By default, it is empty. Command Mode Global Configuration Mode Example Configure the system IP as 192.168.0.69 and the Subnet Mask as 255.255.255.0: TP-LINK(config)# ip address 192.168.0.69 255.255.255.0 107