TP-Link TL-SG5428 TL-SG5428 V1 CLI Reference Guide - Page 16
Using the CLI, 1.1 Accessing the CLI, 1.1.1 Logon by a console port
View all TP-Link TL-SG5428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 1 Using the CLI 1.1 Accessing the CLI You can log on to the switch and access the CLI by the following two methods: 1. Log on to the switch by the console port on the switch. 2. Log on to the switch remotely by a Telnet or SSH connection through an Ethernet port. 1.1.1 Logon by a console port To log on to the switch by the console port on the switch, please take the following steps: 1. Connect the PCs or Terminals to the console port on the switch by a provided cable. 2. Click Start → All Programs → Accessories→ Communications → Hyper Terminal to open the Hyper Terminal as the figure 1-1 shown. Figure 1-1 Open Hyper Terminal 3. The Connection Description Window will prompt as figure1-2. Enter a name into the Name field and click OK. 4