TP-Link TL-SL5428E Quick Installation Guide - Page 15

Power On, Connecting to Power Supply - reset

Get TP-Link TL-SL5428E PDF manuals and user guides
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

3.4 Power On Plug in the negative connector of the provided power cord into the power socket of the Switch, and the positive connector into a power outlet as shown in Figure 3-4. Figure 3-4 Connecting to Power Supply * The figure is to illustrate the application and principle. The power plug you get from the package and the socket in your situation will comply with the regulation in your country, so they may differ from the figure above. Powering on the Switch, it will automatically initialize and its LED indicators will respond as follows: 1) All of the 10/100M and 1000M LED indicators will flash momentarily and then turn off, which represents a resetting of the system. 2) The PWR LED indicator will light on all the time. 3) The SYS LED indicator will flash, which represents a successful initialization. Note: If the LED indicators don't respond as described above, please check the power supply and its connection. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
10
3.4 Power On
Plug in the negative connector of the provided power cord into the power
socket of the Switch, and the positive connector into a power outlet as shown
in Figure 3-4.
Figure 3-4 Connecting to Power Supply
*
The figure is to illustrate the application and principle. The power plug you get from the
package and the socket in your situation will comply with the regulation in your country, so
they may differ from the figure above.
Powering on the Switch, it will automatically initialize and its LED indicators will
respond as follows:
1) All of the 10/100M and 1000M LED indicators will flash momentarily and
then turn off, which represents a resetting of the system.
2) The PWR LED indicator will light on all the time.
3) The SYS LED indicator will flash, which represents a successful
initialization.
Note:
If the LED indicators don’t respond as described above, please check the
power supply and its connection.