TRENDnet TEW-713RE Quick Installation Guide - Page 11

Technical Specifications - eu

Page 11 highlights

TRENDnet User's Guide Technical Specifications Hardware Standards Interface LED Indicators Power Buttons Power Plug Dimensions (L x W x H) Weight Temperature Humidity Based on IEEE 802.11n technology, IEEE 802.11b, IEEE 802.11g IEEE 802.3u, and IEEE 802.3 1 x 10/100 Mbps Auto‐MDIX LAN port Green Static: Repeater connect to AP successfully Flashing: Initializing WPS Orange Flashing: Not able to connect to AP Red Repeater is restarting On / off switch Reset button - restores factory default settings WPS button - enables WPS function Input: 100 ~ 240 V, 0.4 A AC, 50~60 Hz 81 x 52 x 31.5 mm (3.2 x 2.0 x 1.2 in.) - Base 81 x 52 x 49.5 mm (3.2 x 2.0 x 1.95 in.) - With US plug 81 x 52 x 70.5 mm (3.2 x 2.0 x 2.78 in.) - With Europlug (EU) 79.4 g (2.8 oz) Operating: 0° ~ 40°C (32° ~ 104°F) Max 90% (non‐condensing) TEW‐713RE Wireless Modulation Antenna Frequency Data Rate (Auto Fallback) Output Power Receiving Sensitivity Encryption Channels Certifications OFDM and CCK Built in antenna 2.412 ‐ 2.462GHz FCC 2.412 - 2.472GHz ETSI 802.11n: up to 150 Mbps 802.11g: up to 54 Mbps 802.11b: up to 11 Mbps 802.11b: 18 dBm (typical) @ 11 Mbps 802.11g: 15 dBm (typical) @ 54 Mbps 802.11n: 14 dBm (typical) @ 150 Mbps 802.11b: ‐82 dBm (typical) @ 11 Mbps 802.11g: ‐70 dBm (typical) @ 54 Mbps 802.11n: ‐70 dBm (typical) @ 150 Mbps 64/128‐bit WEP, WPA / WPA2‐PSK 1‐11 (FCC), 1‐13 (ETSI) CE, FCC *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. © Copyright 2013 TRENDnet. All Rights Reserved. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW
713RE
9
Technical Specifications
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
Hardware
Standards
Based on IEEE 802.11n technology, IEEE 802.11b, IEEE 802.11g
IEEE 802.3u, and IEEE 802.3
Interface
1 x 10/100 Mbps Auto
MDIX LAN port
LED Indicators
Green
Static: Repeater connect to AP successfully
Flashing: Initializing WPS
Orange
Flashing: Not able to connect to AP
Red
Repeater is restarting
Power
On / off switch
Buttons
Reset button – restores factory default settings
WPS button – enables WPS function
Power Plug
Input: 100 ~ 240 V, 0.4 A AC, 50~60 Hz
Dimensions
(L x W x H)
81 x 52 x 31.5 mm (3.2 x 2.0 x 1.2 in.) – Base
81 x 52 x 49.5 mm (3.2 x 2.0 x 1.95 in.) – With US plug
81 x 52 x 70.5 mm (3.2 x 2.0 x 2.78 in.) – With Europlug (EU)
Weight
79.4 g (2.8 oz)
Temperature
Operating: 0° ~ 40°C (32° ~ 104°F)
Humidity
Max 90% (non
condensing)
Wireless
Modulation
OFDM and CCK
Antenna
Built in antenna
Frequency
2.412
2.462GHz FCC
2.412 – 2.472GHz ETSI
Data Rate (Auto Fallback)
802.11n: up to 150 Mbps
802.11g: up to 54 Mbps
802.11b: up to 11 Mbps
Output Power
802.11b: 18 dBm (typical) @ 11 Mbps
802.11g: 15 dBm (typical) @ 54 Mbps
802.11n: 14 dBm (typical) @ 150 Mbps
Receiving Sensitivity
802.11b:
82 dBm (typical) @ 11 Mbps
802.11g:
70 dBm (typical) @ 54 Mbps
802.11n:
70 dBm (typical) @ 150 Mbps
Encryption
64/128
bit WEP, WPA / WPA2
PSK
Channels
1
11 (FCC), 1
13 (ETSI)
Certifications
CE, FCC