TRENDnet TEW-P11G User's Guide - Page 73
IPP Client Setup - Windows 2000/XP
UPC - 710931600568
View all TRENDnet TEW-P11G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
IPP Client Setup - Windows 2000/XP Windows 2000 and XP have their own IPP Client, and there is no need to install the supplied IPP Client Software. To use the Windows IPP Client with the Print Server, follow this procedure: 1. Start the Add Printer wizard. 2. Select Network Printer, and click "Next" to see the Locate your Printer screen, as shown below. Figure 4: Windows 2000 - Locate your Printer 3. Select Connect to a printer on the Internet or on your Intranet, and enter the URL of the IPP Server as follows, where ip_address represents the IP Address of the IPP Server, and 631 is the port number. Port 1 ip_address:631/ipp/P1 These entries are case sensitive. They must be entered as shown, with "ipp" in lower case, and P1 in UPPER case. 4. If the connection can be established, and the printer on that port is on-line, the following dialog will be displayed. Figure 5: Windows 2000: No printer driver 5. Click "OK", and then select the printer manufacturer and model to match the printer connected to the port on the IPP Server. 6. Click "Next", and complete the Wizard. The IPP printer is now ready for use. Page 70