TRENDnet TV-IP121WN User's Guide - Page 7
Infrared LEDs, Light Sensor, Power LED, Link/Act LED, WPS Button, Detachable Antenna, Camera Stand - reset
UPC - 710931303742
View all TRENDnet TV-IP121WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
- Infrared LEDs: It allows your camera to capture clear images in a dark environment. - Lens: Adjust the focus by rotate outside of the Lens. - Light Sensor: It is used to trigger on and off the Infrared LEDs according to the environmental light level. - Power LED: A steady orange light indicates the camera is powered on. - Link/Act LED: A blinking green light indicates the camera's network connection correctly. - WPS Button: A push button to help you to connect camera to your secured wireless network. - Detachable Antenna: The detachable external antenna allows you to adjust its position to obtain the maximum signal. - Camera Stand Connector: Connects the camera with the camera stand. - Power Connector: Connects the AC power adapter to supply power to the camera. - LAN Port: It is used to connect the network RJ-45 cable, which supports the Auto-MDIX so that the camera can detect the network speed automatically. - Reset Button: Rest will be initiated when the reset button is pressed once. The power LED begins to flash. Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when Power LED begins to light up. Release the reset button and the Power LED will begin to flash. - 6 -