Texas Instruments voyage 200 User Manual - Page 921

Vector Format Determines how 2-element and 3-element vectors are displayed. You can enter vectors in any of the coordinate systems. 1:RECTANGULAR Coordinates are in terms of x, y, and z. For example, [3,5,2] represents x = 3, y = 5, and z = 2. 2:CYLINDRICAL Coordinates are in terms of r, q, and z. For example, [3,∠45,2] represents r = 3, q = 45, and z = 2. 3:SPHERICAL Coordinates are in terms of r, q, and f. For example, [3, ∠45, ∠90] represents r = 3, q = 45, and f = 90. Pretty Print Determines how results are displayed on the Home screen. 1:OFF 2:ON Results are displayed in a linear, onedimensional form. For example, p^2, p/2, or ‡((x-3)/x) Results are displayed in conventional mathematical format. For example, p2, π-- , or x 3- 2 x Note: For a complete description of these settings, refer to "Formats of Displayed Results" in the Operating the Calculator module. Split Screen Lets you split the screen into two parts. For example, you can display a graph and see the Y= Editor at the same time. 1:FULL 2:TOPBOTTOM 3:LEFT-RIGHT The screen is not split. The applications are shown in two screens that are above and below each other. The applications are shown in two screens that are to the left and right of each other. To determine what and how information is displayed on a split screen, use this mode in conjunction with other modes such as Split 1 App, Split 2 App, Number of Graphs, and Split Screen Ratio. (Split Screen Ratio is available on the Voyage™ 200 only.) Split 1 App and Split 2 App Specifies which application is displayed on the screen. • For a full screen, only Split 1 App is active. • For a split screen, Split 1 App is the top or left part of the screen and Split 2 App is the bottom or right part. Appendix B: Technical Reference 915