Thermador HMWB36WS Instructions for Use - Page 10
Touch Control Panel
View all Thermador HMWB36WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Touch Control Panel NOTE: Not all features referred to in this manual applies to all models. FILTER DELAY 0 1 2 3 4 AUTO LIGHTS CONNECT 1 (1) FILTER (2) DELAY (3) 0 (4) 1 - 4 (5) AUTO (6) LIGHTS (7) CONNECT 2 3 4 5 6 7 Clean Filter Reminder After 40 hours of operation, the FILTER button will illuminate indicating that the filters need to be cleaned. When this indicator illuminates clean the filters as instructed on page 15. After cleaning, press and hold the FILTER button for 3 seconds until it beeps to reset the 40-hour period and to turn the reminder off. Receive clean filter reminder notification through the Home Connect™ app when activated in Settings section, as well as see filter saturation status. Delay Shut Off If the blower is off when the DELAY button is pressed, the blower will turn on to the high speed setting for 10 minutes. Once time has elapsed, the blower will automatically turn off. If the blower is on when the DELAY button is pressed, the blower runs for 10 minutes from the time the DELAY button was pressed at the current speed then turns off. During the 10 minute timed period, the DELAY button is illuminated. To interrupt a timed period, press one of the fan speed buttons or 0 button to turn off. Ability to choose a different time period and speed than the default setting is possible through the Home ConnectTM app in the settings menu. OFF Touch '0' once to turn the blower off and reset the control. Fan Speed Increases or decreases the blower speeds. The chosen blower speed LED will remain illuminated while in operation. 1 - Low 2 - Medium 3 - Medium/High 4 - High Automatic Mode When in AUTO mode, the hood automatically turns the blower on, depending on the amount of heat the control senses. It automatically adjusts every 5 minutes. If the control does not sense a high level of heat, it will turn the blower off. Remotely control and monitor hood fan speeds through Home Connect™ app. LED Light Control This button controls the LED lighting. The first press turns the lights on. A second press dims the lights. A third press turns the lights off. 0-100% light slider in Home Connect™ app allows additional control to obtain the perfect level of light. Home ConnectTM This function allows the user to connect the hood with a mobile device. See "Home Connect™" on page 11. Control tone To turn OFF/ON the control tone, hold the FILTER and LIGHTS button for 3 seconds. Control tone can also be turned OFF/ON through the settings section of the Home Connect™ app. English | 10 |