Thermador HMWB36WS Instructions for Use - Page 15
Care and Cleaning
View all Thermador HMWB36WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Care and Cleaning Grease Filters Cleaning Cleaning Chart WARNING Be sure the entire appliance (including the filters and lights) has cooled and grease has solidified before attempting to clean any part of the appliance. Your hood has removable aluminum mesh filters. They must be cleaned when the FILTER light illuminates on the touch panel or whenever they collect grease. When used over a grill, wok or other high grease applications, more frequent cleaning may be required. The filters may be washed by hand or in the dishwasher. Soak the ventilation filters in hot water using a mild detergent. Rinse well and shake to dry. Slight discoloration can occur when cleaning the filters in a dishwasher. This has no influence on the function of the grease filters. NOTE: Reverse the directions below to remove the filters. Ensure filters are cool and grease has solidified before removal. NOTE: Do not use cooktop, rangetop, or range while hood is disassembled. To Install Filters: •• Remove the filter by pulling the spring release filter latch and then pulling down the filter. •• Reinstall the filter by making sure the spring release filter latch is toward the front. Insert aluminum filter into upper track. •• Push in spring release filter latch. •• Push up on aluminum filter and release handle to latch into place. Access additional tips and tricks through the Home Connect™ app. Anodized Aluminum Surfaces Aluminum Mesh Filters Plastic surfaces Painted surfaces Stainless Steel Surfaces Wash top and underside with hot sudsy water. Rinse and wipe dry or apply Fantastic® or Formula 409® first to a clean sponge or paper towel and wipe clean. DO NOT USE powdered cleaners or steel wool pads. Clean filters in the dishwasher or by agitating in sudsy water. Ensure that there is no soil trapped in the fine mesh. Dry the filters before reinstalling them. DO NOT REMOVE control buttons. Wipe with a moist soapy sponge. Rinse and dry. For general care, wipe the outside of the hood with sudsy water or household cleaners such as Fantastic or Formula 409, rinse well and dry with a clean soft cloth to avoid water marks. DO NOT USE powdered cleansers or steel wool pads. Wipe and dry stainless steel in the same direction as the grain. Avoid using too much pressure, which may mar the surface. To remove finger prints and give added shine, use cleaners such as Stainless Steel Magic. Do not allow any cleaning compounds to remain in contact with stainless steel for extended periods. Hood Surface Cleaning •• For general care, wipe the outside of the stainless steel with mild, lukewarm, soapy water. Always wipe and dry in the direction of the stainless steel grain. Avoid using too much pressure, which may mar the surface. •• DO NOT use abrasive products such as steel wool. •• DO NOT use cellulose sponges. Some sponges are processed with salt and can cause corrosion by leaving salt deposits on the metal. •• DO NOT allow any cleaning compounds to remain in contact with stainless steel for extended periods. •• DO NOT USE CHLORINE-BASED CLEANERS. •• To remove fingerprints and produce added shine, use a stainless steel cleaner or conditioner. The THERMADOR Stainless Steel Conditioner can be purchased online (US only) at: www.store.thermador.com (order part number 00576697). Use and Care Guide English | 15 |