Thermador ME302WS View Kitchen Design and Planning Guide - Page 73

| THERMADOR | VENTILATION | THERMADOR | VENTILATION PLANNING INFORMATION Wall Hoods Model Options When selecting a ventilation system, choose from one of our two sophisticated appliance collections. Select from the Professional Collection for the ultimate in cooking and venting power or the Masterpiece® Collection for its sleek styling and numerous convenience functions. Thermador Wall Hoods are available in various depths and heights to fit your kitchen plans and are meticulously crafted for both function and design. Be sure to reference the correct model information in this design guide. Electrical Specifications Be sure your Thermador Wall Hood is properly installed and grounded by a qualified technician. Installation, electrical connections and grounding must comply with all applicable local codes. Install a suitable conduit box (not furnished). An appropriately-sized, ULlisted conduit connector must be used to correctly attach the conduit to the junction box. Remote blowers require a 5-wire installation. Installation Considerations The information in this design guide provides key features, product dimensions, cutouts and installation specifications. Before installing a Thermador Wall Hood, be sure to verify the cutout dimensions and electrical connections. Installation instructions are subject to change. Always consult with the installation manual included with the product for complete details prior to the installation. Installation Options Thermador Wall Hoods may be installed above a Thermador Range or Cooktop to create a convenient cooking center. Refer to the ventilation selection guide for compatibility. Hood installation height above a range or cooktop can vary. To obtain the necessary installation height above a Thermador Range or Cooktop, consult the appliance's installation manual. Accessory 6" and / or 12" tall duct covers are used to fill the space between the hood and ceiling. Thermador Wall Hoods can be mounted on a wall or suspended from a cabinet. The cabinet must be structurally joined to the wall studs to support the weight of this hood. PH60GWS, PH54GWS, PH48GWS, PH42GWS Amps Watts PH36GWS Amps Watts PH48HWS Amps Watts PH36HWS Amps Watts PH30HWS Amps Watts HMWB36WS, HMWB30WS Amps HMWB481WS, HMWB361WS Amps HMDW36WS, HMDW30WS Amps Remote Blower VTR1FZ 5.7 684 - - - VTR2FZ 16.3 1,956 15.5 1,860 11.1 1,956 10.3 1,236 10.3 1,236 - - - Electric Load (120V, 60Hz) Inline Blower VTI1FZ 5.7 684 - - - VTI2FZ 16.3 1,956 15.5 1,860 11.1 1,956 10.3 1,236 10.3 1,236 - - - Integrated Blower VTN1DZ VTN2FZ - 14.7 - 1,764 - 13.9 - 1,668 - 9.5 - 1,764 - 8.7 - 1,044 3.3 8.7 396 1,044 Blower Included, 3.4 Blower Included, 7.6 Blower Included, 3.4 142 Visit Thermador.com for complete specifications or text a Thermador model number to 21432 to have specs sent to your phone INSTALLATION Wall Hoods PH60GWS 27-Inch Depth Wall Hood (60-Inch Width) 5915/16" (1522 mm) 21/4" (57 mm) 255/8" 83/4" (650 mm) 71/4" (222 mm) (185 mm) 27" (686 mm) 12" (305 mm) 18" (457 mm) PH54GWS 27-Inch Depth Wall Hood (54-Inch Width) 5315/16" (1370 mm) 21/4" (57 mm) 225/8" 83/4" (575 mm) 71/4" (222 mm) (185 mm) 27" (686 mm) 12" (305 mm) 18" (457 mm) 4" (102 mm) measurements in inches (mm) PH48GWS 27-Inch Depth Wall Hood (48-Inch Width) 4715/16" (1218 mm) 21/4" (57 mm) 195/8" 83/4" (498 mm) 71/4" (222 mm) (185 mm) 27" (686 mm) 12" (305 mm) 18" (457 mm) 4" (102 mm) measurements in inches (mm) PH42GWS 27-Inch Depth Wall Hood (42-Inch Width) 4" (102 mm) measurements in inches (mm) PH36GWS 27-Inch Depth Wall Hood (36-Inch Width) 3515/16" (913 mm) 21/4" (57 mm) 139/16" 83/4" (345 mm) 71/4" (222 mm) (185 mm) 27" (686 mm) 12" (305 mm) 18" (457 mm) 4" (102 mm) measurements in inches (mm) Visit Thermador.com for complete specifications or text a Thermador model number to 21432 to have specs sent to your phone 143