Thermador POD302W Instruction manual - Page 23
To remove Flat Rack from Oven
View all Thermador POD302W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Flat Rack The rack is designed with a stop so it will stop before coming completely out of the oven and not tilt. To insert Flat Rack into Oven: 1. Grasp rack firmly on both sides. 2. Insert rack (see picture). 4. Push the rack in until it is even with the front hooks. 5. Lift the rack up to lock the last hook into place. 6. Push the rack in completely. 7. Engage the rack's front hooks in the accessory brackets. 3. Tilt rack up to allow stop into rack guide. 4. Bring rack to a horizontal position and push the rest of the way in. Rack should be straight and flat, not crooked. To remove Flat Rack from Oven: 1. Grasp rack firmly on both sides and pull rack toward you. 2. When the stop is reached, tilt rack up and pull the rest of the way out. Telescopic Rack To insert Telescopic Rack into Oven: 1. Hold the rack at a slight angle. 2. Engage the rear hooks in the accessory brackets. This is very important to ensure that the rack is installed correctly (see the enlarged picture). 9 CAUTION To avoid possible injury or damage to the appliance, ensure telescopic rack is installed exactly per installation instructions and not backwards or upside down. 3. Hold the rack straight to allow second tab to rest over rack guide. 23
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88