Thermador PRG366WH Installation Instructions - Page 22

Door removal and adjustment

Get Thermador PRG366WH PDF manuals and user guides View all Thermador PRG366WH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

4. Make sure the backguard's front face is outside the flange on the front side of the range. 3. Flip the hinge clips for both sides of the door. A screwdriver may be required to carefully pry the clip. 5. Re-install screws removed in Steps 1 and 2. Door removal and adjustment 9 CAUTION • USE CAUTION WHEN REMOVING THE DOOR. THE DOOR IS VERY HEAVY. • Make sure oven is cool and power to the oven has been turned off before removing the door. Failure to do so could result in electrical shock or burns. • The oven door is heavy and fragile. Use both hands to remove or replace the door. • Failure to grasp the oven door firmly and properly could result in personal injury and product damage. • With the door off, never release the levers and try to close the hinges. Without the weight of the door, the powerful springs will snap the hinges closed with great force. To remove the oven door 1. Be sure to read the above CAUTION before attempting to remove the door. 2. Open the door fully. 4. Close the door gently until it stops against the hinge clips. The open hinge clips will hold the door open at a slight angle, about 30°, from the closed position. 5. Grasp the door firmly on the ends of the door. Lift the door up and out. There will be some spring resistance to overcome. 6. Place the door in a safe and stable location. Page. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Page. 20
4.
Make sure the backguard’s front face is outside the
flange on the front side of the range.
5.
Re-install screws removed in Steps 1 and 2.
Door removal and adjustment
9
CAUTION
•
USE CAUTION WHEN REMOVING THE DOOR.
THE DOOR IS VERY HEAVY
.
•
Make sure oven is cool and power to the oven has
been turned off before removing the door. Failure
to do so could result in electrical shock or burns.
•
The oven door is heavy and fragile. Use both
hands to remove or replace the door.
•
Failure to grasp the oven door firmly and properly
could result in personal injury and product
damage.
•
With the door off, never release the levers and try
to close the hinges. Without the weight of the
door, the powerful springs will snap the hinges
closed with great force.
To remove the oven door
1.
Be sure to read the above
CAUTION
before
attempting to remove the door.
2.
Open the door fully.
3.
Flip the hinge clips for both sides of the door. A
screwdriver may be required to carefully pry the clip.
4.
Close the door gently until it stops against the hinge
clips. The open hinge clips will hold the door open at
a slight angle, about 30°, from the closed position.
5.
Grasp the door firmly on the ends of the door. Lift the
door up and out. There will be some spring resistance
to overcome.
6.
Place the door in a safe and stable location.