Thermador PRG366WH Installation Instructions - Page 26

Normal for Natural Gas

Get Thermador PRG366WH PDF manuals and user guides View all Thermador PRG366WH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

3. Repeat the ignition and flame test for each rangetop burner. Flame characteristics Yellow flames: Further Adjustment is required. Yellow tips on outer cones: Normal for LP Gas Soft blue flames: Normal for Natural Gas The burners that feature XLO®, cause the flame to cycle on and off when the knob is set to the XLO function. This is normal operation. When flame is properly adjusted: • There should be a flame at each burner port. • There should be no air gap between the flame and burner port. Call Thermador service if: • Any of the burners do not light. • Any of the burners continue to burn yellow. If the flame is completely or mostly yellow, verify that the regulator is set for the correct fuel. After adjustment, retest. Some orange-colored streaking is normal during the initial start-up. Allow unit to operate 4-5 minutes and re-evaluate before making adjustments. Page. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Page. 24
3.
Repeat the ignition and flame test for each rangetop
burner.
The burners that feature XLO
®
, cause the flame to cycle
on and off when the knob is set to the XLO function. This
is normal operation.
When flame is properly adjusted:
•
There should be a flame at each burner port.
•
There should be no air gap between the flame
and burner port.
Call Thermador service if:
•
Any of the burners do not light.
•
Any of the burners continue to burn yellow.
Flame characteristics
Yellow flames:
Further Adjustment is
required.
Yellow tips on outer cones:
Normal for LP Gas
Soft blue flames:
Normal for Natural Gas
If the flame is completely or mostly yellow, verify that
the regulator is set for the correct fuel. After
adjustment, retest.
Some orange-colored streaking is normal during the
initial start-up.
Allow unit to operate 4-5 minutes and re-evaluate
before making adjustments.