Timex T610S User Guide - Page 18

Troubleshooting PROBLEM The alarm does not sound POSSIBLE CAUSE • The alarm was not set correctly for AM/PM • Alarm icons are not on the display • The wrong alarm icon was on the display • The alarm was not set correctly for AM/PM REMEDY • Check the alarm time setting • Press the Alarm Mode Button until the Alarm icon appears on the display • Make sure the alarm you wish to wake to is the only Alarm icon that appears on the display • When waking to CD, always make sure a CD has been inserted • Always insert the CD with the label surface facing up • Push down gently until the door is completely closed • All alarms default to buzzer during a power failure as long as working batteries are inserted correctly inside the battery compartment • Connect to an AC outlet • Try the unit on another outlet • Do not use an outlet that is controlled by a wall switch • Check the bottom of the disc and clean if necessary with a soft cleaning cloth, always wipe from the center out • Clean with a commercial lens cleaner The alarm sounds at an incorrect time Buzzer alarm is heard when waking to CD • A CD was not inserted into the CD player • The CD was inserted incorrectly into the player • Compartment CD player door is not closed • There was a power failure There is no display and the CD/radio will not play • The unit is disconnected from an AC outlet • The AC outlet has no power • The AC outlet is controlled by a wall switch that is off • Dirty or defective disc • Dirty lens CD skips while playing If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service, 1-800-888-4491 17