Toshiba 32A60 Owners Manual - Page 19

Welcome to Toshiba Connecting your TV Using the Remote Control Setting up your TV To select the antenna input: 1. Press the TV/VIDEO button on the TV. The signal source you are connected to is displayed in purple. TV/VIDEO TV VIDEO 1 ANT 1 VIDEO 2 ANT 2 COLOR STREAM TO SELECT PUSH TV/VIDEO MENU TV/VIDEO VOLUME CHANNEL T St s POWER 2. Press the button until ANT 1 or ANT 2 is displayed in purple, indicating the antenna terminal you wish to use. Adding channels to the TV's memory Your TV will stop on specific channels that are stored in the TV's channel memory when you press Channel L or M. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory, you can erase channels or add your favorite channels. If you use both ANT-1 and ANT-2 terminals, you must program channels for each input source. To add channels: 1. Press MENU, then press x or • to highlight the SET UP menu. 2. Press y or z until the TV/CABLE selection is highlighted. 3. Press x or • to highlight either TV or CABLE, depending on which you use. PICTURE AUDIO SET UP PREFER C.CAPT LANGUAGE: ANT1/2: TV/CABLE: CH PROGRAM ADD/ERASE: MORE SELECT[ ] [ENGLISH]FRANCAIS ESPANOL [ANT1]ANT2 [TV]CABLE [ADD]ERASE If you use an antenna, choose TV. If you use cable, choose CABLE. 4. Press z to select CH PROGRAM. 5. Press x or • to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "CH PROGRAM" appears. 6. When channel programming is complete, the message "CH Completed (channel or cable number)" appears. 7. Press Channel L or M to view the programmed channels. RECALL MUTE POWER 1 2 3 4 5 6 7 8 9 CH RTN 100 0 ENT CH VOL MENU/ VOL ENTER CH TV CABLE VCR EXIT Menu/Enter Exit Using the TV's Features Appendix Index Reference 13