Toshiba 32AX60 Owners Manual - Page 31

Welcome to Toshiba Connecting your TV Using the Remote Control Changing the position of the small picture With the TV in PIP mode, press LOCATE to change the display position of the small picture. Every time you press LOCATE, the small picture display changes position in a counter-clockwise manner. POWER LIGHT RECALL TV CABLE VCR MUTE TV/VIDEO TIMER 12 45 3 CH 6 78 9 CH RTN VOL 100 0 ENT ADV/ PIP CH Channel C.CAPT EXIT MENU RESET Freezing the small picture With the TV in PIP mode, press STILL to freeze the small picture. The small picture becomes a still picture (outlined in red in the onscreen display). Press STILL again to return to the moving picture (outlined in green in the on-screen display). Still FAV ENTER FAV PIP Channel ADV/ PIP CH STOP SOURCE PLAY PIP REC TV/VCR REW FF STILL LOCATE SWAP PIP Source Swap Locate Still Watching multi-window PIP Multi-window PIP appears as six small boxes across the bottom of the screen. Multi-window PIP cannot be viewed unless channels are programmed into the TV's memory (see "Adding channels to the TV's memory" on page 12). Note: The LOCATE, SWAP, PIP CH yz, SOURCE, and STILL buttons do not work in Multi-window PIP mode. To view multi-window PIP: Press PIP three times. The TV cycles through the programmed channels and shows a few seconds of each channel's programming, then freezes the image and moves on to the next channel in a continuous cycle. The channel number appears above each small PIP window. Note: Multi-window PIP shows channels programmed for the signal source you are currently viewing (ANT-1 or Cable). Setting up your TV Using the TV's Features Appendix 14 23 27 30 43 56 A To turn multi-window PIP off: Press PIP again or change the channel. Index Reference 25