Toshiba 32WL66 Owners Manual - Page 7

Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. the back of your television Audio cable for PC to television connection (not supplied) Computer Mini D-sub 15 pin connector RGB PC cable (not supplied) Conversion adaptor if required (not supplied) Connect the PC cable from the computer to the PC terminal on the back of the television. Connect the audio cable to the PC/HDMI1 Audio socket on the back of the television. Select PC from the PC/HDMI1 audio options in the AV connection menu located in the SET UP menu. B Press the to select PC mode. The following signals can be displayed: VGA: 640 x 480/60 Hz (VESA) SVGA: 800 x 600/60 Hz (VESA) XGA: 1024 x 768/60 Hz (VESA) SXGA: 1280 x 1024/60 Hz (VESA) IMPORTANT NOTE: SXGA will display but it will not be to VESA standard. PLEASE NOTE: Some PC models cannot be connected to this television. An adaptor is not needed for computers with a DOS/V compatible mini D-sub 15 pin terminal. A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction. When PC input mode is selected some of the television's features will be unavailable e.g. Manual setting in the SET UP menu, Colour, Tint, DNR and Black Stretch in the Picture settings menu. Signal information for Mini D-sub 15 pin connector Pin assignment for RGB/PC terminal Pin. No. Signal name Pin No. 1 R 9 2 G 10 3 B 11 4 NC (not connected) 12 5 NC 13 6 Ground 14 7 Ground 15 8 Ground Signal name NC Ground NC NC H-sync V-sync NC 7