Toshiba 42HM66 Owner's Manual - English - Page 32

Lamp unit replacement and care - noise

Page 32 highlights

8 Appendix English Lamp unit replacement and care The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE How to replace the lamp unit 2. STOP! Allow thTeHlISamPpROtoDcUoCoTlYfOorUaRtSlEeaLsFt. one (1) hour before replacing it. TO REDUCE WARNING: RISK OF ELECTRIC SHOCK! THE RISK OF ELECTRIC SHOCK, NEVER CAUTION: HOT SURFACE! The lightnTinhge sliygmhtbnoinl ginstyhmebtroilainngtlheetetlrlisanygolue tthealltstyhoeu that the REMOvcToaVHulEItSsaegPeaRniOnvcTesDoalHieUdulIcteSCsategrTtPihecaYRisnOisOnhpUesDorliReUodccSdeCktEu.rTtiDhcLcYtiFOsOs.mhpUNaorROyocSTdkbTcATifEu.TmeoooLhDcLRoulLsptleFOlYcoOte.morhdewTWoNriaxnOnwtOygatcTgihTSlnlHbtlaiheETtrEesmeenRossLsolaYVpautAyurtmlIeTMotmigCorOpinhPnEabngbttSsToioemeenOElfvn.ogRaeCorrVerOauekIingCOtbihdhnELuartmntsohsae. intrtieannagnleceteinllsstyruocutitohnast TV COVERS, EXCEPT AS SPECIFIED HEREIN. REFER ALL FOR AT LEAST ONE (1) HOUR BEFORE REPLACING IT. SERVICING NOT SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE PERSONNEL. in death or serious injury. Failure to follow this WARNING may reTshueltexclamThaet3ioe.xnOcmlanamrthkateinolnathmmepatrukianinnigt tldheoetoetrlrlisaonnygotluheetthesallitsdeyoouf tthhaet TV, loosen the ifmolploowrtathnitsifmooslpplyoemowrrabttatsloaihnclmi.trgseopsawpynuemdbnraybmittoiuadnls.igoniontaergn.ndaanmscaleointitnteesdntrasuncccrteieowinnsdsrtrivuecrtioannsd then remove the The light source for this TV is a mercury lamp with internal atmospheric pressure that increases during TV back use. The lamp has a limited service life that varies depending on product use and user settings. As is generally the case with all projection TV's that use projection lamps as a light source, the brightness of the lamp in theis TV may vary somewhat overthe expected service life and will generally decrease over time. Because of the many variables that can affect the useful service life of the lamp. your experience may vary from other users. Note : The lamp is warranted only for the periods and to the extent set forth in the Limited Warranty applicable to this set. See " Limited United States Warranty" (on page 34) or "Limited Canada Warranty" (on page 35), as applicable. If you use the lamp beyond its service life: • you may notice a reduction in the colors and/ or brightness of the picture; and • the strength of the quartz glass in the lamp will be reduced and the lamp may repture (often making a loud noise when this happens). If the lamp reptures, the TV will not operated until the lamp unit is replaced. CAUTION: Always handle the lamp unit with care.The lamp unit in this TV was designed for safe replacement by consumers; however, if the lamp unit is subjected to intentional abuse (such as excessive mechanical abuse or hadling by children or pet) the unit may break, exposing sharp edges or pinch points. Required tools: Manual Slotted screwdriver. Lamp unit door detail screw 4. Using a Slotted screwdriver or a coin, loosen the two screws on the lamp unit. Lamp unit screws WARNING: RISK OF ELECTRIC SHOCK! The lamp unit door is provided with an interlock to reduce the risk of electric shock and excessive ultraviolet radiation. Never defeat its purpose or attempt to service without removing the lamp unit door completely. Failure to follow this WARNING may result in death or serious injury. 5. Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside (see "Disposing of the used lamp unit" on page 33). 1. Turn off the TV and unplug the power cord. WARNING: Eye damage may result from directly viewing the light produced by this lamp. Always turn off the TV and unplug the power cord before opening the lamp unit door. Note: Wear soft, lint-free gloves when replacing the lamp unit. 32 Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

³²
English
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
8
Appendix
How to replace the lamp unit
WARNING:
RISK OF
ELECTRIC SHOCK!
The lamp unit door is provided with an
interlock to reduce the risk of electric shock and excessive ultraviolet
radiation.
Never defeat its purpose or attempt to service
without removing the lamp unit door completely.
Failure to
follow this WARNING may result in death or serious injury.
4.
Using a Slotted screwdriver
or a coin, loosen the two
screws on the lamp unit.
Lamp unit screws
WARNING:
Eye damage may result from directly
viewing the light produced by this lamp. Always turn off
the TV and unplug the power cord before opening the
lamp unit door.
Note: Wear soft, lint-free gloves
when replacing the lamp unit.
WARNING: RISK OF
ELECTRIC SHOCK!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
NEVER REMOVE
TV COVERS, EXCEPT AS SPECIFIED HEREIN.
REFER ALL
SERVICING NOT SPECIFIED IN THIS MANUAL TO QUALIFIED
SERVICE PERSONNEL. Failure to follow this WARNING may result
in death or serious injury.
CAUTION: HOT SURFACE!
Touching the lamp before it has
cooled will result in severe burns.
ALLOW THE LAMP TO COOL
FOR AT LEAST ONE (1) HOUR BEFORE REPLACING IT.
2. STOP! Allow the lamp to cool for at least one (1) hour
before replacing it.
Required tools:
Manual Slotted screwdriver.
1. Turn off the TV and unplug the power cord.
5.
Grasp the lamp unit handle and gently pull the lamp unit
straight out of the TV. Set the old lamp unit aside
(see “Disposing of the used lamp unit” on page 33).
3. On the lamp unit door on the side of the TV, loosen the
screw by using a slotted screwdriver and then remove the
lamp unit door.
TV back
screw
Lamp unit door detail
Lamp unit replacement and care
The light source for this TV is a mercury lamp with
internal atmospheric pressure that increases during
use. The lamp has a limited service life that varies
depending on product use and user settings.
As is generally the case with all projection TV’s that
use projection lamps as a light source, the brightness
of the lamp in theis TV may vary somewhat overthe
expected service life and will generally decrease over
time. Because of the many variables that can affect the
useful service life of the lamp. your experience may
vary from other users.
Note : The lamp is warranted only for the periods and to
the extent set forth in the Limited Warranty applicable
to this set. See “ Limited United States Warranty” (on
page ³´) or “Limited Canada Warranty” (on page ³µ),
as applicable.
If you use the lamp beyond its service life:
• you may notice a reduction in the colors and/ or brightness of
the picture; and
• the strength of the quartz glass in the lamp will be reduced
and the lamp may repture (often making a loud noise when
this happens). If the lamp reptures, the TV will not operated
until the lamp unit is replaced.
CAUTION:
Always handle the lamp unit with
care.
The lamp unit in this TV was designed for safe
replacement by consumers; however, if the lamp unit is
subjected to intentional abuse (such as excessive mechanical abuse
or hadling by children or pet) the unit may break, exposing sharp
edges or pinch points.