Toshiba 51HC85 User Manual - Page 11

Introduction Connecting your Monitor Using the remote control Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite and VCR. You will need: • one (or two, if satellite receiver is used) coaxial cable • one set of standard A/V cables (between the monitor and VCR) • one S-video cable (between the monitor and DVD player/satellite receiver) • one pair of standard audio cables (between the monitor and DVD player/satellite receiver) Stereo VCR IN from ANT OUT to TV CH 3 CH 4 From Antenna Monitor VIDEO IN OUT L R AUDIO Note: For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable. (If your DVD player has component video, see page 12. If your DVD player or satellite receiver has HDMI or DVI, see page 15.) Do not connect both an S-video cable and a standard video cable between the monitor and DVD player/satellite receiver at the same time or the picture performance will be unacceptable. Do not connect the DVD player/satellite receiver and VCR to the same set of Video inputs on the monitor. (See the illustrations, which show the DVD player/satellite receiver connected to Video-1 on the monitor, and the VCR connected to Video-2 on the monitor.) The unauthorized recording, use, OUT 1 distribution, or revision of television OUT 2 programs, videotapes, DVDs, and other IR materials is prohibited under Copyright Law of the United States and other countries, and may subject you to civil and criminal liability. From Satellite Dish S-VIDEO VIDEO OUT OUT IN from ANT S-VIDEO VIDEO OUT OUT AUDIO OUT L R DVD player Satellite receiver AUDIO OUT L R Setting up your Monitor Operating your Monitor Appendix Index #01E_08-17_51HC85 11 Black (E) 51HC85, 57HC85, 65HC85 05.4.28, 6:16 PM 11