Toshiba 51HC85 User Manual - Page 22

CBL/SAT, RECALL, Channel Number, POWER, Device Switch

Page 22 highlights

Introduction Connecting your TV Using the remote control Setting up your TV Programming the remote control to operate your other devices Your Toshiba monitor remote control is preprogrammed to operate most Toshiba devices. To program your monitor remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see pages 20-21. 1. In the remote control code table (below and on the next page), find the code for your device. If more than one code is listed, try each one separately until you find one that works. 2. Set the Device Switch to the type of device you are programming the remote control to operate - CBL/SAT (for a cable converter box or satellite receiver), VCR (for a VCR or TV/VCR combo), or DVD (for a DVD player or HTIB [home theater in a box]). 3. While holding down RECALL, press the Channel Number buttons to enter the 3-digit code for your device. 4. To test the code, turn on the device, point the remote control at it, and press POWER. See notes at right. • If the correct code was entered, the device will turn off. • If the device does not respond, repeat steps 1 - 4 using another code. • If the device does not respond to another code, you will need to use the remote control that came with the device. 5. Remember to set the Device Switch back to "TV" to control the monitor. 6. For future reference, write down the code(s) you used: DEVICE CODE DEVICE CODE Remote control codes In some cases you may not be able to operate your device with the monitor remote control. Your other device may use a code that is not recognized by the monitor remote control. If this happens, use the device's remote control. INPUT RECALL POWER INFO 123 456 789 +10 100 0 ENT MENU RECALL POWER Channel Number buttons TOP EXIT AR PIC SIZE ENTEERNT MENU DVDMENU ER TV CBL/SAT CH VCR DVD CLE VOL POP DIRECT CH MUTE SLEEP Device Switch TV/VCR PAUSE STOP PLAY FREEZE SOURCE SPLIT NoteRE:W FF SKIP / SEARCH • In addition CH SCAN SWAP REC to POWER, POP CH LIGHT confirm that all necessary keys on the monitor remote control will operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device's original remote control. • Every time you change the batteries, you will need to reprogram the remote control. • Some newer VCRs respond to either of two codes. These VCRs have a switch labeled "VCR1/VCR2." If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position ("VCR1" or "VCR2") and reprogram the remote control. Cable converter box ABC: 061, 062, 063, 082, 084, 087, 091, 092, 096, 098 Archer: 065, 092, 097, 099 Cableview: 064, 094 Century: 092 Citizen: 090, 092, 097 Contec: 083, 085, 086, 088, 093, 098 Diamond: 093 Eagle: 091 GE: 061, 062 Gemini: 069, 070, 094 General Instruments: 062, 089, 096 22 Hamlin: 093 Hitachi: 062, 095, 096 Jasco: 097 Jerrold: 062, 069, 071, 082, 086, 089, 091, 096 Magnavox: 072, 096 Memorex: 091, 092, 104 Multi Canal: 090 Novavision: 101 Panasonic: 081, 083, 085 Philco: 087 Philips: 066, 067, 068, 070, 072, 073, 074, 075, 091, 092 Pioneer: 076, 077 Proscan: 061, 062 Radio Shack: 092, 097, 099 RCA: 064, 081 Realistic: 065 Recoton: 102 Samsung: 077, 090 Scientific Atlanta: 063, 078, 079, 080, 088, 098, 101, 105 Sears: 095 Signature: 062 Signature 2000: 096 Sprucer: 081, 085 Starcom: 069, 082, 087, 096, 103, 104 Stargate: 069, 090 Sylvania: 095, 100 TeleView: 090 Texscan: 100 Tocom: 071, 084, 085 U. S. Electronics: 087, 096, 098 United Cable: 082 Universal: 065, 092, 097, 099, 102, 103 Wards: 096 Satellite receiver Alphastar: 038, 059 Chaparral: 034 DISH Network: 057 Drake: 020, 040, 044, 046, 050, 053 Echostar: 018, 041, 051 Express Vu: 057 Fujitsu: 027 GE: 008, 009, 013 General Instruments: 010, 011, 012, 022, 023, 031, 049 Hitachi: 033 Hughes: 033 Hughes Network Systems: 019 Intersat: 048 Janeil: 027 JVC: 017, 057 Kenwood: 029 Magnavox: 060 Optimus: 058 Pansat: 036, 052 Primestar: 015, 042 Proscan: 008, 009, 013 Radio Shack: 022, 023, 030 Using the TV's Features Appendix Index #01E_18-23_51HC85 22 Black (E) 51HC85, 57HC85, 65HC85 05.4.28, 6:16 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

Introduction
Connecting
y
our TV
Using the
r
emote control
Setting up
y
our TV
Using the TV
s
F
eatures
Appendix
Index
22
(
E
) 51HC85, 57HC85, 65HC85
1
2
3
4
5
6
7
8
9
ENT
100
0
POWER
RECALL
INPUT
+10
PIC SIZE
EXIT
INFO
/
TV
CBL/SAT
VCR
DVD
VOL
CH
ENTER
DVDMENU
MENU
T
O
P
M
E
N
U
C
L
E
A
R
E
N
T
E
R
Programming the remote control to operate
your other devices
Your Toshiba monitor remote control is preprogrammed to operate
most Toshiba devices. To program your monitor remote control to
operate a non-Toshiba device (or a Toshiba device that it is not
preprogrammed to operate), follow the steps below. For details on
using the remote control to operate the device, see pages 20–21.
1.
In the remote control code table (below and on the next page),
find the code for your device. If more than one code is listed, try
each one separately until you find one that works.
2.
Set the Device Switch to the type of device you are programming
the remote control to operate —
CBL/SAT
(for a cable converter
box or satellite receiver),
VCR
(for a VCR or TV/VCR combo),
or
DVD
(for a DVD player or HTIB [home theater in a box]).
3.
While holding down
RECALL
, press the
Channel Number
buttons to enter the 3-digit code for your device.
4.
To test the code, turn on the device, point the remote control at
it, and press
POWER
.
See notes at right.
• If the correct code was entered, the device will turn off.
• If the device does not respond, repeat steps 1 – 4 using
another code.
• If the device does not respond to another code, you will need
to use the remote control that came with the device.
5.
Remember to set the
Device Switch
back to
“TV”
to control the
monitor.
6.
For future reference, write down the code(s) you used:
Remote control codes
In some cases you may not be able to operate your device with the
monitor remote control. Your other device may use a code that is not
recognized by the monitor remote control. If this happens, use the
device’s remote control.
Note:
In addition to POWER, confirm that all
necessary keys on the monitor remote
control will operate your device. If some
keys are not operational, repeat the device
code setup using another code (if other
codes are listed for your device). If, after
trying all listed codes, the necessary keys
do not operate your device, use the
device’s original remote control.
Every time you change the batteries, you
will need to reprogram the remote control.
Some newer VCRs respond to either of two
codes. These VCRs have a switch labeled
“VCR1/VCR2.” If your VCR has this kind of
switch and does not respond to the codes
for your VCR brand, set the switch to the
other position (“VCR1” or “VCR2”) and
reprogram the remote control.
POWER
Channel
Number buttons
Device Switch
RECALL
Cable converter
box
ABC: 061, 062, 063,
082, 084, 087, 091,
092, 096, 098
Archer: 065, 092, 097,
099
Cableview: 064, 094
Century: 092
Citizen: 090, 092, 097
Contec: 083, 085, 086,
088, 093, 098
Diamond: 093
Eagle: 091
GE: 061, 062
Gemini: 069, 070, 094
General Instruments:
062, 089, 096
Hamlin: 093
Hitachi: 062, 095, 096
Jasco: 097
Jerrold: 062, 069, 071,
082, 086, 089, 091,
096
Magnavox: 072, 096
Memorex: 091, 092, 104
Multi Canal: 090
Novavision: 101
Panasonic: 081, 083, 085
Philco: 087
Philips: 066, 067, 068,
070, 072, 073, 074,
075, 091, 092
Pioneer: 076, 077
Proscan: 061, 062
Radio Shack: 092, 097,
099
RCA: 064, 081
Realistic: 065
Recoton: 102
Samsung: 077, 090
Scientific Atlanta: 063,
078, 079, 080, 088,
098, 101, 105
Sears: 095
Signature: 062
Signature 2000: 096
Sprucer: 081, 085
Starcom: 069, 082, 087,
096, 103, 104
Stargate: 069, 090
Sylvania: 095, 100
TeleView: 090
Texscan: 100
Tocom: 071, 084, 085
U. S. Electronics: 087,
096, 098
United Cable: 082
Universal: 065, 092, 097,
099, 102, 103
Wards: 096
Satellite receiver
Alphastar: 038, 059
Chaparral: 034
DISH Network: 057
Drake: 020, 040, 044,
046, 050, 053
Echostar: 018, 041, 051
Express Vu: 057
Fujitsu: 027
GE: 008, 009, 013
General Instruments:
DEVICE
CODE
DEVICE
CODE
010, 011, 012, 022,
023, 031, 049
Hitachi: 033
Hughes: 033
Hughes Network
Systems: 019
Intersat: 048
Janeil: 027
JVC: 017, 057
Kenwood: 029
Magnavox: 060
Optimus: 058
Pansat: 036, 052
Primestar: 015, 042
Proscan: 008, 009, 013
Radio Shack: 022, 023,
030
#01E_18-23_51HC85
05.4.28, 6:16 PM
22
Black