Toshiba M105-S3004 Toshiba Online User's Guide for Satellite M105 - Page 56
Firmly press the memory module into the memory slot's, horizontal surface of the computer.
UPC - 032017538498
View all Toshiba M105-S3004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
56 Getting Started Adding memory (optional) 10 Locate an empty memory module slot on the underside of the computer. NOTE If no memory slot is available, you must remove a module by performing steps 2-3 of "Removing a memory module" on page 58. 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector's notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the module with the socket 12 Firmly press the memory module into the memory slot's socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Aligning the module in the socket
56
Getting Started
Adding memory (optional)
10
Locate an empty memory module slot on the underside of
the computer.
If no memory slot is available, you must remove a module by
performing steps 2-3 of
“Removing a memory module” on
page 58
.
11
Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector’s notch with the
matching key in the socket.
(Sample Illustration) Aligning the module with the socket
12
Firmly press the memory module into the memory slot’s
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Aligning the module in the socket
NOTE
latch
latch
connector
notch
key