Toshiba Portege 4010 User Guide - Page 45
Down or Turn Off command., You can pry the panel out of its position by using a flat - driver
View all Toshiba Portege 4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Getting Started Setting up your computer 45 1 Shut down your computer completely using the Shut Down or Turn Off command. See "Powering down the computer" on page 135. 2 Unplug the computer and remove any cables you may have connected. CAUTION: Installing a memory module with the computer's power on may damage the computer, the module, or both. 3 Open the display panel and remove the panel that contains the Power and TOSHIBA Console buttons. CAUTION: When removing the computer's power and TOSHIBA Console button panel to install additional memory, be careful not to damage the display or circuit board. Using a flat head screw driver to pry the panel off You can pry the panel out of its position by using a flat head screwdriver. Starting at the left or right side, carefully wedge the flat head screwdriver between the panel and the surrounding housing. Grasp the end of the panel, lift up and wiggle it back and forth until the panel comes free.