Toshiba Portege R600 PPR65U Maintenance Manual - Page 134

3 Tests and Diagnostics 3.3 Setting of the hardware configuration Subtest 02 7. "Create DMIINFO TXT (Y/N)?" is displayed. Press Y, then the DMI information (text data) is written to the Floppy disk, etc. Setting of the HWSC Setting of the UUID Display of the DMI information (including UUID) After completion of the above settings, H/W configuration & DMI information are appeared in order. Check the contents and press Enter. DMI information save NOTE: Before replacing the system board, be sure to execute this subtest and save the DMI information to the floppy disk. This is one of tools to copy the DMI information to a new PCB after replacing. This subtest saves all the DMI data in a floppy disk. Subtest 03 DMI information recovery This is one of tools to copy the DMI information to a new PCB after replacing. This subtest writes all the DMI data in the floppy disk into the new PCB. NOTE: Since the data of UUID is updated every time when this subtest, DMI information recovery, is done, the saved UUID data is not written. 3-10 [CONFIDENTIAL] PORTEGE R600 Maintenance Manual (960-709)