Toshiba Portege R600 PPR65U Maintenance Manual - Page 245
Installing the Memory module
View all Toshiba Portege R600 PPR65U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
4.6 Memory module 4 Replacement Procedures Installing the Memory module To install the memory module, confirm that the computer is shut down. Then follow the steps below and refer to Figure 4-5 and 4-6. CAUTION: When installing the memory module, make sure the computer is powered off. Inserting a memory module with the power on might damage the module or the computer itself. Never press hard or bend a memory module. 1. Insert the memory module into the connector slantwise and press it to connect firmly. CAUTION: After installing the memory module, make sure that the memory module is secured with the left and right latches. 2. Install the memory cover and secure it with the screws. CAUTION: When securing the memory module with the screw, use a "Switch-drive-type electric screwdriver". Do not use a "Push-drive-type electric screwdriver". 3. When the power of the computer is turned on, the computer checks automatically the memory size. Confirm that the new memory is detected correctly. 4. If the memory is not detected, check that it is connected correctly. PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-17