Toshiba Portege R600 PPR65U Maintenance Manual - Page 268

4 Replacement Procedures 4.16 Sound board/Microphone 3. Disconnect the microphone from the connector CN6050 on the sound board and remove the microphone from the sound board. Microphone CN6050 Figure 4-22 Removing the sound board/Microphone (2) Installing the Sound board/Microphone To install the sound board/microphone, follow the steps below and refer to Figure 4-21 and 4-22. 1. Set the microphone to the slot of the sound board and connect the microphone to the connector CN6050 on the sound board. 2. Connect the sound board FPC and speaker harness to the connector CN9510 and CN6350 on the sound board. 3. Set the sound board to the slot and secure it with following screw. • M2×4C S-THIN HEAD ×1 4-40 [CONFIDENTIAL] PORTÉGÉ R600 Maintenance Manual (960-709)