Toshiba R600-SP2801C Maintenance Manual - Page 215

3.32 SETUP 3 Tests and Diagnostics Critical Battery Wake-up Configures what action is taken when the remaining battery power is close to running out while the system is in Sleep Mode. This setting is only available when the Critical battery action in Windows is set to Hibernate (Default). To access it, Start -> Control Panel -> System and Maintenance -> Power Options -> Edit Plan Settings -> Change advanced power settings -> Battery. The operation of this function is dependent upon battery status. Enabled When the remaining battery power is about to run out while the system is in Sleep Mode, the system is automatically woken up and then switched to Hibernation Mode (Default). Disabled No action is taken even if the remaining battery power is about to run out while the system is in Sleep Mode. (g) Beep Volume This Option sets up the volume of a Beep sound. Medium→High→OFF→Low (h) Diagnostic Mode This option enables/disables the HW Diagnostic test function. Enabled Disables the HW Diagnostic test function. (Default) Disabled Enables the HW Diagnostic test function. (i) USB Sleep and charge This Option sets up whether a power supply is supplied to a USB device, when PC is in a Sleep mode state. Disabled A power supply is not supplied in a Sleep mode state. (Default) Enabled（Mode1） Enabled（Mode2） Enabled（Mode3） Enabled（Mode4） A power supply is supplied in a Sleep mode state. A power supply is supplied in a Sleep mode state. A power supply is supplied in a Sleep mode state. A power supply is supplied in a Sleep mode state. PORTEGE R600 Maintenance Manual (960-709) [CONFIDENTIAL] 3-91