Toshiba Satellite L630-BT2N22 User Manual - Page 165
GHz Band Channels Sets Wireless IEEE 802.11 Revision A and N, Channel ID
View all Toshiba Satellite L630-BT2N22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
L630/L635 12 2467*2 13 2472*2 *1 Factory-set default channels *2 The band width and the channel which can be used depends on the installed wireless LAN module. And the approved channels on using are different at each country or region. The channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required. ■ For Wireless LAN modules installed in wireless clients that operating in a peer-to-peer mode, the module will use the default channel 10. ■ In a Wireless LAN Access Point, the Wireless LAN module will use the factory-set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device. 5 GHz Band Channels Sets (Wireless IEEE 802.11 Revision A and N) Frequency Range Channel ID 34 36 38 40 42 44 46 48 52 56 60 64 100 104 108 5150-5850 MHz 5170*2 5180*2 5190*2 5200*2 5210*2 5220*2 5230*2 5240*2 5260*2 5280*2 5300*2 5320*2 5500*2 5520*2 5540*2 User's Manual C-3