Toshiba Satellite M30X-S171ST Maintenance Manual - Page 26
Optical device Drives, Power Supply, Hardware Overview
View all Toshiba Satellite M30X-S171ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1 Hardware Overview 1.5 Power Supply 1.4 Optical device Drives • CD-RW/DVD-ROM drive • DVD+-R/+-RW drive • DVD Super Multi ddrive 1.5 Power Supply The power supply supplies seven different voltages to the system board and performs the following functions: 1. A/D conversion The EC uses 10-bit sampling for A/D conversion to determine the following values: • AC adaptor current • Battery and temperature 2. AC adaptor and battery check The EC checks the following by A/D converted values: • Battery installed The EC checks the following by GPIO values: • AC adaptor connected 3. Abnormal check The EC determines whether the condition is abnormal, and if so, stores an error code into the error register. 4. Input port management The EC monitors the following input signal status: • System power ON/OFF status • Direct CD power ON/OFF status 5. Beep and LED control Beep is caused by the low battery status. The EC controls the following two kinds of LED 1-12 Satellite M30X Series Maintenance Manual