Toshiba TDP-T250U Owners Manual - Page 23

Using the menus (Continued) ■ The default setting menu This menu shows placement status and other settings. Item Projection mode Description Sets projection mode in accordance with Placement Style. p.22 (Standard) (Rear) (Mounted from ceiling) (Rear mounted from ceiling) Blackboard mode When projecting on a non-screen surface, select a color in accordance with the projecting surface. Press . Switch with and . Off/Green/Black/Brown/Blue/Beige No signal power off Set the time to wait for the power to be turned off after signal input stops or the last operation. Press . Switch with and . Off (not turned off)/1 min./5 min./10 min./30 min./60 min. Auto input Set whether the input with signals is only selected or not. search On Off Power on Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto). Manual Auto Lamp power Sets the lamp power. Low Standard Fan mode Sets the cooling fan speed. Standard High Remote control When two or more projectors are used and controlled by the remote code control respectively, this menu sets the code for the projector and the remote control. [ :Enter setting mode] [ : Select item] [ : Select from 1, 2, 3, 4] [ :Confirm] [ :Select OK to end] Press [Cancel] to return. Key lock Lock the control panel buttons. [ :Enter setting mode] [ On/Off] [ :Confirm] [ Press [Cancel] to return. : Select item] [ :Select OK to end] : Select Reset all Press . Resets all adjustments and settings to their factory settings. Yes No Password Password function p.36 On Off When [Password] is [On], the Password Setting screen is displayed. Detailed description [Blackboard mode] Projects the image in colors more like projecting on a screen. Precaution The projected image may differ depending on the type, color, and material of the blackboard and wall even if the selected color is the same as the projected screen. 44 [Auto input Search] [On]: Automatically searches the signals that can be projected, and switches input from the connected device that outputs the signals each time the INPUT button is pressed. The input from the connected device that outputs no signals is skipped. [Off]: Displays the Switch input menu. Toggle with buttons and press button (The input without signals can be selected.) Switch input menu Switch input Computer (1) (digital) Y/PB/PR (1) (digital) Computer (1) (analog) Y/PB/PR (1) (analog) Computer (2) Y/PB/PR(2) Computer (3) Y/PB/PR(3) Video S-video



/



shows whether signal is [Power on] input or not. Note that if [Power on] is set to [Auto], then if the main power switch is ON when power is restored after a power outage, the projector will come on. [Lamp power] When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling fan noise gets quieter. [Fan mode] Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector, for example, at high altitude (over 1,500 meters above sea level). [Remote control code] Sets a remote control code from 4 types. You can set each code respectively for up to 4 projectors. The factory setting is [1]. To switch codes, set the same code for the projector and the remote control. A remote control code is applied after the setting is done. • You cannot operate the remote control if the codes of the projector and the remote control do not match. Remote control code setting for remote control Remove the battery cover and set the same remote control code switch as the projector. p.16 (Use a screwdriver with thin tip to set.) [Key lock] Protect from operating errors by locking on the control panel buttons of the projector. (The remote control operations are available.) Control panel operations are locked after the setting is done. • To release the key lock, press the control panel's RETURN button for 10 seconds. The key lock is released with a beep sound. 45 Operations