Toshiba TDP-T250U Owners Manual - Page 29

Specifications (Continued) ■ List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. Resolution 720 x 400 640 x 480 800 x 600 832 x 624 1024 x 768 1152 x 864 1280 x 960 1280 x 1024 * 1400 x 1050 * 1600 x 1200 Mode 720x400_85 VGA_60 VGA_72 VGA_75 VGA_85 SVGA_56 SVGA_60 SVGA_72 SVGA_75 SVGA_85 MAC16" XGA_60 XGA_70 XGA_75 XGA_85 MAC19" SXGA1_75 QuadVGA_60 QuadVGA_85 SXGA3_60 SXGA3_75 SXGA3_85 SXGA+ UXGA_60 UXGA_65 UXGA_70 UXGA_75 UXGA_85 Refresh rate (Hz) 85.039 59.940 72.809 75.000 85.008 56.250 60.317 72.188 75.000 85.061 74.550 60.004 70.069 75.029 84.997 74.700 75.000 60.000 85.002 60.020 75.025 85.024 60.012 60.000 65.000 70.000 75.000 85.000 H-frequency (kHz) 37.927 31.469 37.861 37.500 43.269 35.156 37.879 48.077 46.875 53.674 49.725 48.363 56.476 60.023 68.667 60.134 67.500 60.000 85.938 63.981 79.976 91.146 63.973 75.000 81.250 87.500 93.750 106.250 Clock (MHz) 35.500 25.175 31.500 31.500 36.000 36.000 40.000 50.000 49.500 56.250 57.283 65.000 75.000 78.750 94.500 79.857 108.000 108.000 148.500 108.000 135.000 157.500 118.094 162.000 175.500 189.000 202.500 229.500 * Depending on the model of computer, the image may not be displayed properly with the DVI input. Note • Signals which resolution exceeds the native resolution (1024 × 768 pixels) will be compressed. For this reason, some information may be lost, or image quality may be affected. 56 ■ List of supported signals (Y/PB/PR signals) Signal format * 480i(525i)@60Hz 480p(525p)@60Hz * 576i(625i)@50Hz 576p(625p)@50Hz 720p(750p)@60Hz 720p(750p)@50Hz 1080i(1125i)@60Hz 1080i(1125i)@50Hz 1035i(1125i)@60Hz 1152i(1250i)@50Hz fh(kHz) 15.73 31.47 15.63 31.25 45.00 37.50 33.75 28.13 33.75 31.25 * DVI digital input is not supported. fv(Hz) 59.94 59.94 50.00 50.00 60.00 50.00 60.00 50.00 60.00 50.00 ■ List of supported signals (Video, S-Video signals) Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 fh(kHz) 15.73 15.63 15.63 15.73 15.63 15.73 15.73 fv(Hz) 60 50 50 60 50 60 60 fsc(MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 ■ Pin assignment of COMPUTER-2 & MONITOR terminals 5 1 Pin Pin description No. During RGB input During Y/PB/PR input 1 Video signal (R) Color difference signal (PR) 2 Video signal (G) Luminance signal (Y) 10 6 3 Video signal (B) 4 GND Color difference signal (PB) ∗ 15 11 Mini D sub 15 Pin connector 5 GND 6 GND (R) 7 GND (G) ∗ GND (PR) GND (Y) Input Signal 8 GND (B) GND (PB) • RGB input 9 N.C ∗ RGB signals: 0.7V (p-p) 75 Ω 10 GND ∗ Horizontal sync signal: TTL level (Pos/neg polarity) 11 GND ∗ Vertical sync signal: TTL level (Pos/neg polarity) 12 N.C ∗ • Y/PB/PR input 13 Horizontal sync signal ∗ Y signal: PB/PR signals: 1.0V (p-p) 75 Ω 0.7V (p-p) 75 Ω 14 Vertical sync signal ∗ 15 N.C ∗ ∗ Do not connect anything. 57 Others