Toshiba TLP-X4500U User Manual - Page 35
Picture-2 Menu, Description, V Position, H Phase, H Size, Over Scan, Reset
View all Toshiba TLP-X4500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Multifunctional Settings (continued) PICTURE-2 Menu MENU MAIN V POSITION 20 PICTURE-1 H POSITION 142 PICTURE-2 H PHASE 31 With the PICTURE-2 menu, the items shown in the table below can INPUT AUTO H SIZE OVER SCAN 1344 95 be performed. Perform each operation in accordance with the SCREEN OPTION RESET instructions in the table below. NETWORK : SELECT memo This menu cannot be selected at a M1-D signal. Item V POSITION H POSITION H PHASE H SIZE OVER SCAN RESET Description Adjust the vertical position using the / buttons. : Up Down memo This item can be selected only at a RGB signal. Adjust the horizontal position using the / buttons. : Left Right memo This item can be selected only at a RGB signal. Adjust the horizontal phase to eliminate flicker using the / buttons. : Right Left memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART RGB. Adjust the horizontal size using the / buttons. : Large Small memo This item can be selected only at a RGB signal. memo When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button during this operation. Adjust the over-scan ratio using the / buttons. : Small Large memo This item can be selected only at a video signal. memo When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Select the EXECUTE using the button to reset the PICTURE-2 menu items. : EXECUTE CANCEL The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the item "H PHASE" is not reset. 34