Toshiba Tecra A8 Maintenance Manual - Page 211
LAN/Modem/Bluetooth/IEEE1394 Test Program, Tests and Diagnostics, Table 3-6, Error code
View all Toshiba Tecra A8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics Table 3-6 Error code for Bluetooth test (BD_ADDR) (2/2) Error code Meaning 0x20 Unsupported LMP Parameter Value. 0x21 Role Change Not Allowed. 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2a 0x2b 0x2c 0x2d 0x2e 0x2f LMP Response Timeout. LMP Error Transaction Collision. LMP PDU Not Allowed. Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist See the Specification of the Bluetooth System in detail. Subtest03 Communication tests (DUT mode) This subtest checks the Bluetooth communication functions. Preparing the tester machine for the Bluetooth test program. Insert a floppy disk containing the test program into the tester machine and turn on the tester machine. The Bluetooth test menu will appear: Press 3 to select the test and press Enter in the target machine. The following message will appear: When the test begins, the machine displays BD_ADDR of the DUT. The progress bar stops when the test is completed. The following message is displayed. Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX Copyright (C) by TOSHIBA Co. | DUT | BD_ADDR of the DUT = XXXXXXXXXXXXX [h] Ready