Toshiba Tecra A8 Maintenance Manual - Page 307
LCD unit/FL inverter, Replacement Procedures
View all Toshiba Tecra A8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
4.25 LCD unit/FL inverter 4 Replacement Procedures Installing the LCD unit/FL inverter To install the LCD unit/FL inverter, follow the steps below and refer to Figure 4-37 to 4-40. 1. Connect the LCD cable to the connector on the back of the LCD unit. Stick two glass tapes in place. 2. Install the LCD unit to the display cover and secure it with the following screws. • M2×3C BIND screw ×4 3. Arrange the LCD cable through the hook and connect the LCD cable to the connector CN5000 on the system board. 4. Connect two cables to the FL inverter and install the FL inverter in place. 5. Insert the insulator under the LCD unit. 6. Install the LCD mask while engaging the latches. 7. Secure the LCD mask with the following screws and stick the mask seals. • M2.5×6B FLAT HEAD screw ×2 8. Install the keyboard cover while engaging latches. TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-61