Toshiba Tecra M2 Maintenance Manual - Page 228
Separating the HDD, screws, HDD bracket
View all Toshiba Tecra M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
4 Replacement Procedures 4.5 HDD NOTE: The following steps describe how to disassemble the HDD pack; however, do not disassemble if the HDD is working properly. 4. Place the HDD pack on a flat surface, and remove the following screws. • M3×4Z FLAT HEAD screw ×4 5. Separate the HDD from the HDD bracket. CAUTION: Do not apply pressure to the top or bottom of the HDD. M3×4Z FLAT HEAD HDD HDD bracket Figure 4-6 Separating the HDD M3×4Z FLAT HEAD 4-14 TECRA M2 Maintenance Manual (960-468)
4 Replacement Procedures
4.5
HDD
NOTE:
The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4.
Place the HDD pack on a flat surface, and remove the following
screws
.
•
M3
×
4Z
FLAT HEAD screw
×
4
5.
Separate the
HDD
from the
HDD bracket
.
CAUTION:
Do not apply pressure to the top or bottom of the HDD.
M3
×
4Z FLAT HEAD
HDD
Figure 4-6
Separating the HDD
HDD bracket
M3
×
4Z FLAT HEAD
4-14
TECRA M2 Maintenance Manual (960-468)