Tripp Lite B0930042E4U Owners Manual for B093- B097- and B098-Series Console S - Page 185

10. Nagios Integration 10.2.1 Enable Nagios on the Console Server Select System: Nagios on the console server management console and check the service Enabled checkbox. Enter the Nagios Host Name the console server will be referred to in the Nagios central server. This will be generated from local System Name (entered in System: Administration) if unspecified. In Nagios Host Address, enter the IP address or DNS name the upstream Nagios server will use to reach the console server. If unspecified, this will default to the first network port's IP (Network (1) as entered in System: IP). In Nagios Server Address, enter the IP address or DNS name the console server will use to reach the upstream Nagios monitoring server. Check the Disable SDT Nagios Extensions option if you wish to disable the SDT connector integration with your Nagios server at the head end. Only select this option if you want to run basic Nagios monitoring. Otherwise, enter the IP address or DNS name the SDT Nagios clients will use to connect the console server in SDT Gateway Address. When NRPE and NSCA are both enabled, NSCA is the preferred method for communicating with the upstream Nagios server. Make sure to check Prefer NRPE to use NRPE whenever possible (i.e., for all communication except for alerts). 185