Tripp Lite B0930042E4U Owners Manual for B093- B097- and B098-Series Console S - Page 190

10. Nagios Integration 10.3 Advanced Distributed Monitoring Configuration 10.3.1 Sample Nagios Configuration An example configuration for Nagios is listed below. The example configuration shows how to set up a remote console server to monitor a single host with both network and serial connections. Each check contains two configurations: one for NRPE and one for NSCA. In practice, these would be combined into a single check using NSCA as a primary method and defaulting to NRPE if checked late. For more information, refer to Nagios documentation (http://www.nagios.org/docs/) on Service and Host Freshness Checks. ; Host definitions ; ; Tripp Lite Console server define host{ use generic-host host_name tripp-lite alias Console server address 192.168.254.147 } ; Managed Host define host{ use generic-host host_name server alias server address 192.168.254.227 } ; NRPE daemon on gateway define command { command_name check_nrpe_daemon command_line $USER1$/check_nrpe -H 192.168.254.147 -p 5666 } define service { service_description NRPE Daemon host_name tripp-lite use generic-service check_command check_nrpe_daemon } ; Serial Status define command { command_name check_serial_status command_line $USER1$/check_nrpe -H 192.168.254.147 -p 5666 -c check_serial_$HOSTNAME$ } define service { service_description Serial Status host_name server use generic-service check_command check_serial_status } define service { service_description serial-signals-server host_name server use generic-service check_command check_serial_status active_checks_enabled 0 passive_checks_enabled 1 } 190