Tripp Lite B0930082E4U Owners Manual for B093- B097- and B098-Series Console S - Page 250

15. Advanced Configuration • Copy the MIBs from /etc/snmp/mibs on the Tripp Lite product to a local directory using scp or Winscp. For example: scp root@b098:/etc/snmp/mibs/* • Using the snmpwalk and snmpget commands, the status information can be retrieved from any console server. For example: snmpwalk -Oa -v1 -M .:/usr/share/snmp/mibs -c public b098 TL-STATUS-MIB::tlStatus snmpget -Oa -v1 -M .:/usr/share/snmp/mibs -c public b098 TL-STATUSMIB:: tlSerialPortStatusSpeed.2 noauth snmpwalk -Oa -v3 -l noAuthNoPriv -u readonlyusername -M .:/usr/share/snmp/mibs b098 TL-STATUS-MIB::tlStatus auth snmpwalk -Oa -v3 -l authNoPriv -u readonlyusername -a SHA -A "authpassword" -M .:/usr/share/snmp/mibs b098 TL-STATUSMIB::tlStatus priv snmpwalk -Oa -v3 -l authNoPriv -u readonlyusername -a SHA -A "authpassword" -x DES -X "privpassword" -M .:/usr/share/snmp/mibs b098 TL-STATUS-MIB::tlStatus -l Security Level -u Security Name or Read Only Username -a Authentication Protocol - SHA or MD5 -A Authentication Password -x Privacy Protocol - DES or AES -X Privacy Password A MIB browser may be used to explore the Tripp Lite enterprise MIB structure. 15.5.4 Adding Multiple Remote SNMP Managers You can add multiple SNMP servers for alert traps and the first and second SNMP servers using the management console (refer to 7. Alerts, Auto-Response and Logging) or the command line config tool. Further SNMP servers must be added manually using config. Log in to the console server's command line shell as root or an admin user. Refer to the management console UI or user documentation for descriptions of each field. To set the SNMP Manager Address field: config -set="config.system.snmp.address3=w.x.y.z" .. replacing w.x.y.z with the IP address or DNS name. To set the Manager Trap Port field: config --set="config.system.snmp.trapport3=162" .. replacing 162 with the TCP/UDP port number. To set the SNMP Manager Protocol field: config --set="config.system.snmp.protocol3=UDP" or config --set="config.system.snmp.protocol3=TCP" To set the SNMP Manager Version field: config --set="config.system.snmp.version3=3" To set the SNMP Manager v1 & v2c community field: config --set="config.system.snmp.community3=public" To set the SNMP Manager v3 Engine ID field: config -set="config.system.snmp.engineid3=0x8000000001020304" .. replacing 0x8000000001020304 with the hex Engine-ID 250