Tripp Lite B0930082E4U Owners Manual for B093- B097- and B098-Series Console S - Page 98
DHCP Pool Start Address
View all Tripp Lite B0930082E4U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5. Firewall, Failover and OOB Access • Click on the Disabled link next to DHCP Server, which will open the System: DHCP Server page. • Check Enable DHCP Server. • To configure the DHCP server, select the Use interface address as gateway check box. • Set the DNS server address(es) to be the same as used on the external network. If the console server is acting as an internet gateway or a cellular router, then use the ISP provided DNS server address • Enter the Default Lease time and Maximum Lease time in seconds. The lease time is the time that a dynamically assigned IP address is valid before the client must request it again. • Click Apply. The DHCP server will sequentially issue IP addresses from a specified address pool(s): • Click Add in the Dynamic Address Allocation Pools field. • Enter the DHCP Pool Start Address and End Address. Click Apply. 98