Tripp Lite SV20KM1P1B Instruction Sheet for PowerAlert Mass Updater Utility En - Page 1
Tripp Lite SV20KM1P1B Manual
View all Tripp Lite SV20KM1P1B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Instruction Sheet PowerAlert® Mass Updater Utility Introduction The PowerAlert Mass Updater Utility enables users to quickly and easily update the network interface (i.e. "webcard") firmware of one or more Tripp Lite networked devices, including LX Platform devices, WEBCARDLX, SNMPWEBCARD, Tripp Lite monitored PDUs, switched PDUs and SRCOOLNET. System Requirements Windows® (7/8/10 or Server 2008/12/16) computer connected to the network. • FOR SNMPWEBCARDs running version 12.04.0055 or later: Port 161 (SNMP) and Port 21 (FTP) not blocked by firewall. Note: FTP needs to be enabled on the SNMPWEBCARD or SNMPWEBCARD55 for file transfer to occur. • FOR LX Platform Devices: HTTP and/or HTTPS ports not blocked by firewall. The default port values are 80 and 443, respectively. Make sure to use Mass Updater 1.1.0 or later when updating LX Platform Devices. To confirm version, right-click on the executable file icon and select Properties. The version is listed in the Details tab. Notes: HTTP and/or HTTPS must be enabled on the LX Platform device and PC ports (default or otherwise). Doing so enables outbound communications through the firewall, allowing the update to be executed. Make sure TCP Port 3664 is open in your firewall. Product Requirements SNMPWEBCARDs running versions 12.04.0055 through 12.06.0069 LX Platform Devices running version 15.00 or later IMPORTANT: SNMPWEBCARDs running versions earlier than 12.04.0055 must use alternate upgrade method detailed in the SNMPWEBCARD Firmware Release Notes. 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2018 Tripp Lite. All rights reserved. 1